i4540-zwave
General Information:
· Exit setting mode: Enter * to exit the setting procedure, or wait for 10 seconds
· Low battery warning: When the voltage drops below 5.2V after entering a valid code, the lock beeps for three times.
· Unlocking indicator: Music sounds and motor rotate.
· Locking indicator: Red Light flashing one time, and music sounds and motor rotate.
· Restore Factory Default
a. Disconnect 1pcs battery
b. Press and hold the reset button
c. While holding the reset button, reconnect the battery
d. Until the lock beeps, release the reset button.
e. Press digit ‘1’ to restore factory default or other digit to abort reset procedure.
f. The lock must be set up again after the reset is complete.
Warning: After restore, all existing user codes and programming code will be erased, default programming code will be restored , but the enrolling of lock with gateway will not be erased. The reset button is located below the battery holder. (See Picture)
i4540 Z-WAVE Lock Feature:
1.ZWAVE lock, intergrate into home automation, suitable for residential and light commercial environments;
2.Unlock way:
1) Phone/PC unlock via Z-WAVE;
2) Pin code: pin code, #;
3) Mechanical key in emergency.
3.Z-WAVE frequency: 906.42MHz (US) / 868.42MHz(EU) / 921.42MHz(AU)
4. 1 group of master code, 20 groups of user code;
5.Option with five latch mortise and single latch mortise;
6.Modern lever handle, option with reversible handle and hidden cylinder handle;
7.Sleeping mode to prevent illegal attempt after input wrong code 4 times;
8.Low battery alert, when battery voltage is below 4.8V, the lock will alert;
9.4 x AA Alkaline Battery.
Zwave Gateway (not included)
*** Our Zwave Lock works well with Fibaro Zwave Gateway, if you already have a zwave gateway, just add our zwave lock in the APPs, and you can control it through smart phone.
*** If you want to control the zwave lock in city "A" through smart phone with WIFI in city "B", just make sure you zwave gateway connected with the WIFI router.
*** If you want to change the code through smart phone, we'd suggest to use Micasa z-wave gateway
*** If you hope to set up passage mode, password with time limit, you can choose Micasa z-wave gateway
Electronic zwave door lock
1. It is operated through smart phone over Apps to control the lock from anywhere on your smart phone, tablet.
2. Works with the gateway from Micasa, Fibaro. and also works with Wink, Iris, Razberry gateway (All tested) (Gateway not included)
3. Material: zinc alloy
4. Users: 30 users, add / delete individual users
5. Auto lock in 5S
6. Powered by 4pcs AA Alkaline battery
7. Reversible door handle
8. Panel size: W69.3 x H156.7 x D85.8mm
9. External power poles option available
10. Mortise: Optional on single latch or five latch mortise
Types to operate the lock:
· User code unlock: 6 digits user code
· Emergency unlock: 8 digits programming code + 9 (for emergency)
· Wireless :Mobile or PC or PAD
· Manual key: Turn the override key 90 degree clockwise, then turn the handle
Terms:
Programming code: 8 digits. The programming code puts the lock into a programming mode. If more than 10 seconds pass in between programming entries, the lock will return to normal operational status. For maximum security it is necessary to change the default Programming Code.
User code: 6 digits. User code is the normal code for day-to-day operations.
Z-Wave: Every unlocking need be through Z-wave Controller.
Index No.*: 2 digits. For each user code. It is associate with a unique number, we call it index No. The Index No. is auto generated by lock and starts with 01. The highest Index No. will be 20. Total user index is 20 that can be added to each lock. (* Please log the user code along with its index No. for deleting reference)
Storehouse mode (Lock-back mode): For each valid entry, lock will automatically relock back in 5 seconds.
Welcome for your inquiry to : holishlocks(at)gmail.com